Bush Hammer Plate For Floor Grinder
Bush Hammer Plate For Walkbehind Grinder
HTC 270mm bush hammer with 6*45 pins rollers (ABHTC019-270mm)
Eric Lai is the co-founder of ACTINTOOL, he has been providing diamond tools for concrete and stone floor processing for more than 10 years. Starting as the sales, Eric has won customers’ trust all over the world.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Eric Lai is the co-founder of ACTINTOOL, he has been providing diamond tools for concrete and stone floor processing for more than 10 years. Starting as the sales, Eric has won customers’ trust all over the world.
Attended international fairs (such as Italy Verona Stone Fair, Germany Nuremberg Stone Fair, Poland Poznan Stone Fair and Mexico CIHAC Expo).
With cusotmers
Eric working in production zone
Thanks to customer’s increasing trust and continual support, Eric has founded ACTINTOOL to start the manufacturing of diamond tools. As the manufacturer, we can customize products in shortest time according to customers’ requirements, provide satisfied products, fast shipping and refund is guaranteed for defective products.
For wholesale price, please send email to judy@actintool.com.
- 10 5/8 inch / 270mm bush hammer plate
- Rollers: 6 rollers, each with 45 tips. Roller Size: 45 diameter, 39mm long
- Functions 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- Fit With SASE PDG 8000, HTC 800, HTC900, HTC1500
- Shipment: 1-3 handing days, normally receive in 10 days after placing order
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable angle grinder, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouseReturns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
240mm/9.5 Inch Lichi Roller Bush Hammer Plate For Diamatic Grinder (ABDIA023-240mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For wholesale price, please send email to judy@actintool.com.
- 9.5 Inch/240mm bush hammer plate for husqvarna grinder
- Roller：3*45tips Lichi roller, 45mm diameter, 39mm long
- Functions 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- N.W: 4.13kg
- Shipment: ship in 2 business days, normally receive in 5-7 days after placing order
| Item No. | ABDIA023-240mm |
| Product Size | 240mm /9.5 Inch Diameter |
| Roller Teeth Qty | 45 tips |
| Roller Qty | 3 pcs |
| Finish | Lichi |
| N.W&G.W | 4.13 /4.5 kg |
| Usage | Concrete and stone |
| Euipment | Diamatic Grinder |
| Package | 1 pcs |
| Delivery Time | 2-3 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | Stripe,Paypal, Western Union, Bank Transfer, T/T. |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable angle grinder, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouseReturns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
HTC 270mm bush hammer with 3*45 pins rollers (ABHTC019-270mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
- 10 5/8 inch / 270mm bush hammer plate for HTC grinder
- Fit With SASE PDG 8000, HTC 800, HTC900, HTC1500
- Rollers: 3 rollers, each with 45 tips. Roller Size: 45 diameter, 39mm long
- Functions 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- Shipment: 2-3 handing days', normally receive in 12 days after placing order
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable angle grinder, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouseReturns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Husqvarna 270mm/11 Inch 45 Tips Lichi Roller Bush Hammer Plate (ABHUS022-270mm)
Eric Lai is the co-founder of ACTINTOOL, he has been providing diamond tools for concrete and stone floor processing for more than 10 years. Starting as the sales, Eric has won customers’ trust all over the world.
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Eric Lai is the co-founder of ACTINTOOL, he has been providing diamond tools for concrete and stone floor processing for more than 10 years. Starting as the sales, Eric has won customers’ trust all over the world.
Attended international fairs (such as Italy Verona Stone Fair, Germany Nuremberg Stone Fair, Poland Poznan Stone Fair and Mexico CIHAC Expo).
With cusotmers
Eric working in production zone
Thanks to customer’s increasing trust and continual support, Eric has founded ACTINTOOL to start the manufacturing of diamond tools. As the manufacturer, we can customize products in shortest time according to customers’ requirements, provide satisfied products, fast shipping and refund is guaranteed for defective products.
For wholesale price, please send email to judy@actintool.com.
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable angle grinder, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouseReturns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Klindex 240mm /9.5 inch Bush Hammer Plate (ABKLD024-240mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For wholesale price, please send email to judy@actintool.com.
- 9.5 Inch/240mm bush hammer plate for Klindex grinder
- Roller：3*45tips Lichi roller, 45mm diameter, 39mm long
- Functions 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- N.W: 4.35kg
- Shipment: ship in 2 business days, normally receive in 5-7 days after placing order.
| Item No. | ABKLD024-240mm |
| Product Size | 240mm Diameter |
| Segment Size/Qty | n/a/45 pcs |
| Roller Qty | 3 pcs |
| Arbor Size | N/A |
| Finish | Lichi |
| N.W&G.W | 4.35 /4.5 kg |
| Usage | Concrete and stone |
| Euipment | Klindex |
| Package | 1 pcs |
| Delivery Time | 2-3 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | Stripe,Paypal, Western Union, Bank Transfer, T/T. |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable angle grinder, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouseReturns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
HTC 230mm/9 Inch Lichi Roller Bush Hammer Plate (ABHTC021-230mm)
Returns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
For wholesale price, please send email to judy@actintool.com.
- 9 inch bush hammer plate for HTC three phase grinder
- Roller: 3*45 pins roller, 45mm diameter, 39mm long.
- Functions 1.Creates anti-slip finish on granite and marble 2.Remove hard coatings and overlays 3.Surface prep for coatings 4.Quickly expose large aggregate 5.Increase concrete bonding effectiveness
- N.W 4.12 kg
- Shipment: 5 days' handing time, normally receive in 10 days after placing order.
| Item No. | ABHTC021-230mm |
| Product Size | 230mm /9 Inch Diameter |
| Roller Teeth Qty | 45 tips |
| Roller Qty | 3 pcs |
| Finish | Lichi |
| N.W&G.W | 4.2 /4.5 kg |
| Usage | Concrete and stone |
| Euipment | HTC |
| Package | 1 pcs |
| Delivery Time | 2-3 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | Stripe,Paypal, Western Union, Bank Transfer, T/T. |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |
Operation Warning
- Working Speed under 1000 RPM.Not recommended for high rpm angle grinder, suggested to install bush hammer on speed adjustable angle grinder, such as makita9227CB/ 9237CB polisher, speed less than 1000 RPM suggested. 30pins bush hammer roller not suggested for three phase walkbehind grinder, too much pressure can break the bearings inside the roller. For three phase grinder, please use the 45 pins bush hammer roller.
- Do not apply too much pressure on bush hammer. This will prevent roller from stopping and thus decrease the life span of the carbide tips.
- Adjusting the plates distance for different finish. For double plates bush hammer, we can adjust the distance between two plates to have finer or rougher finish. Enlarge the distance can have rougher finish, on the contrary, finish finer if narrowing the distance.
- After each use, please clean up rollers, dry and apply oil to the spindles. It will be ideal to submerge the rollers in oil to prevent spindle rust Roller tips can be re-dressed with diamond blades when they become inefficient.
Shipping And Return
Fast Shipping: We will dispatch all items in 2 business days from China warehouseReturns: If your item is faulty or we have sent you something different to what you ordered, return it to us in the original packaging within 30 days and we will give you a replacement or a part refund with shipping cost deducted.
Payment Safety: All transactions are SSL-protected and guaranteed safe
Your Privacy: We will never share your information with anyone.
Husqvarna 270mm/11Inch Knurling Roller Bush Hammer Plate (ABHUS022-SB270mm)
For wholesale price, please send email to judy@actintool.com.
| Item No. | ABHUS022-SB270mm |
| Product Size | 270mm Diameter |
| Segment Size/Qty | n/a |
| Roller Qty | 3 pcs |
| Arbor Size | N/A |
| Finish | Sandblasting |
| N.W&G.W | 6.2 /6.5 kg |
| Usage | Concrete and stone |
| Euipment | Husqvarna |
| Package | 1 pcs |
| Delivery Time | 2-7 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | T/T, Paypal, Western Union |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |
HTC 230mm/9 Inch Knurling Roller Bush Hammer Plate (ABHTC021-SB230mm)
For wholesale price, please send email to judy@actintool.com.
| Item No. | ABHTC021-SB230mm |
| Product Size | 230mm /9 Inch Diameter |
| Segment Size/Qty | n/a |
| Roller Qty | 3 pcs |
| Arbor Size | N/A |
| Finish | Sandblasting |
| N.W&G.W | 4.2 /4.5 kg |
| Usage | Concrete and stone |
| Euipment | HTC |
| Package | 1 pcs |
| Delivery Time | 2-7 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | T/T, Paypal, Western Union |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |
Husqvarna 270mm/11Inch Vacuum Brazed Coarse Roller Bush Hammer Plate (ABHUS022-VBC270mm)
For wholesale price, please send email to judy@actintool.com.
| Item No. | ABHUS022-VBC270mm |
| Product Size | 270mm /11 Inch Diameter |
| Segment Size/Qty | n/a |
| Roller Qty | 3 pcs |
| Arbor Size | N/A |
| Finish | Vacuum Brazed |
| N.W&G.W | 6.2 /6.5 kg |
| Usage | Concrete and stone |
| Euipment | Husqvarna |
| Package | 1 pcs |
| Delivery Time | 2-7 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | T/T, Paypal, Western Union |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |
HTC 230mm/9 Inch Vacuum Brazed Coarse Roller Bush Hammer Plate (ABHTC021-VBC230mm)
For wholesale price, please send email to judy@actintool.com.
| Item No. | ABHTC021-VBC230mm |
| Product Size | 230mm /9 Inch Diameter |
| Segment Size/Qty | n/a |
| Roller Qty | 3 pcs |
| Arbor Size | N/A |
| Finish | Vacuum Brazed |
| N.W&G.W | 4.2 /4.5 kg |
| Usage | Concrete and stone |
| Euipment | HTC |
| Package | 1 pcs |
| Delivery Time | 2-7 days after receiving payment |
| Package | Brown/White carton or customized |
| Payment Method | T/T, Paypal, Western Union |
| Shipping | DHL, FEDEX, TNT, UPS etc. |
| Customer Service | Please send email to judy@actintool.com |
- 1